21
Infill Tab
Infill Pattern: Use the drop-down menu to select one of seven different infill
patterns, including Lines, Grid, Triangles, Zig Zag, Concentric, Cross, and Octet. The
individual patterns are illustrated in the table below.
Infill Before Wall: Check this box to print the model after filling and printing the
outline.
Outer Before Inner Walls: Check this box to print the exterior walls before printing
the interior walls.
Gradual Infill Steps: For models that need to gradually change the fill rate, this value
determines how many layers to change at once.
Infill Patterns
Lines
Grid