20
Adjusting Target Temperature
The Target Temperature is the temperature to which the printer will heat the Nozzle. By
default, the Target Temperature is set to 210°C.
1.
On the Main Menu, rotate the Knob until the Control option is highlighted, then
press the Knob to enter the Control Menu.
2.
Rotate the Knob until the Temperature option is highlighted, then press the Knob to
enter the Adjust Temperature Screen.
3.
Rotate the Knob until the Nozzle option is highlighted, then press the Knob to edit
the value.
4.
Rotate the Knob to change the Target Temperature, then press the Knob to save
the value.
Z Offset Setting
The Z Offset Setting is used to adjust the distance between the Nozzle and the Print Bed.
This can be done before printing or during printing. If the distance between the Nozzle and
the Print Bed is too small, increase the Z Offset. if the distance between the Nozzle and the
Print Bed is too large, decrease the Z Offset. The proper distance between the Print Bed
and the Nozzle is when there is a slight amount of resistance when moving a piece of
ordinary printer paper between the Nozzle and the Print Bed.
If you changed the Z Offset prior to printing, turn the printer off and then back on to save
the setting as the default.