12
•
Auto Home: Moves the Extruder and the X, Y, and Z axes to
their "home" positions.
•
Level Bed: Levels the Print Bed.
•
Disable Steppers: Disables the Stepper Motors. To re-
engage the motors, turn the printer off, then back on again.
•
Wizard: Starts the Initial Setup Wizard.
Control Menu
•
Main: Returns to the Main Menu.
•
Temperature: Displays the Adjust Temperature Screen.
•
Z Offset Setting: Tests the current distance between the
Nozzle and the Print Bed, then displays the Adjust Z Offset
Screen.
•
Wi-Fi Network: Displays the Wi®-Fi Network Menu.
•
Language: Displays the Language Select Screen. The
available languages are English, Chinese, French, German,
Spanish, Italian, Japanese, Portuguese, Dutch, Turkish, and
Korean.
•
Machine Info: Displays the Machine Info Screen.
•
Restore Default: Restores the printer's settings to their factory default values.
Normally, this will not be needed, but should be done after performing a firmware
update.
Wi-Fi Network Menu
•
Control: Returns to the Control Menu.
•
Show IP: Displays the IP address.
•
Wi-Fi Device Info: Displays the Wi-Fi® module name, Wi-Fi
module firmware version number, and IP address.