50
PRINTING
Perform the following steps to print a model on the Guider II printer from a Gcode file
saved to the USB stick.
Generating Gcode
1.
Plug the USB stick into a USB port on your computer.
2.
Double-click the MP FlashPrint shortcut to launch the software.
3.
Click Print > Machine Type and select the MP Guider II entry.
4.
Click the Load icon to load a .STL model file. The model will display within the build
area.
5.
Double-click the Move icon, then click the On the Platform and Center buttons to
ensure the model is in contact with the center of the build platform.