If you think you have to re-adjust the disc brake at any time:
Turn the right brake pad toward the disc rotor until it will touch it. The left brake pad (moving brake pad)
should have a distance of 1,5 mm. Now open the upper srews that connects the discbrake caliper with
the IS 200 Adapter. Press the brakepads to the disc rotor and close the two screws again. The left brake
pad should have a distance of 1-1,5 mm to the disc rotor. Turn the right brake pad counter clockwise so
it will have a distance of 1mm to the disc rotor. Note: if you ever want to replace this discbrake, purchase
only a mechanical discbrake for roadbikes. This will work only with the barendshifter !
You can use the discbrake as drag brake or stop brake. If you have a short break on the trail, you can pull
the discbrake lever and lean with your body toward the trailer to relax as standing against a wall.
