18
Slide
Switches
DECIMAL SELECTOR SWITCH
Allows selection of up to nine decimal settings
+, F, 0, 1, 2, 3, 4, 5, 6. For example, when set
at 2, all totals and results will contain two
KLJPTHSWSHJLZ"H[UVKLJPTHSZ^PSSILWYPU[LK
or displayed. In Floating (F) decimal setting,
results are expressed at maximum decimal
accuracy. When working with dollars and
cents, the Decimal Selector can be set at Add
Mode (+), eliminating the need to enter the
decimal point.
D/PD/N SELECTOR SWITCH
Allows the 8125 to be operated in Display only
mode (d position), Print and Display mode (pd)
or Print and Display mode with n count (n).
TC/ /GT SELECTOR SWITCH
This switch allows three choices. The tc
position stands for “two column”. The
WVZP[PVUPZ[OLUL\[YHSVMMWVZP[PVUHUK[OLN[
position stands for “group and grand total”.
TIME/CALC SELECTOR SWITCH
This switch allows two choices. In the time
position, the 8125 assumes entries are hours
and minutes and operates in time clock
mode. In the calc position, the 8125 operates
normally.
Allows selection of up to eight decimal settings
+, F, 0, 1, 2, 3, 4, 6. For example, when set
D/PD/N SELECTOR SWITCH
Allows the 8130X /8145X to be operated in Display
only mode (d position), Print and Display mode
(pd), Print and Display mode with n count (n).
◊
/
n
/GT SELECTOR SWITCH
This switch allows three choices. The ◊ position
stands for running subtotal in the display. The
n
position is the neutral/off position, and the gt
position stands for “group and grand total”.
+ F 0 1 2 3 4 6
15
