7
THE DISPLAY
__________________________________________________________________
DISPLAY CONTENTS
The amount entered and other transaction information is shown in the display through numbers and symbols.
The display is read from left to right as follows.
Department
- The two leftmost digits identifies the department key pressed with the amount entered right justified.
Repeat/Multiply
– In the event the Qty/Time key has been pressed the two left most digits indicate the multiplier with the
right most digits indicating the price being multiplied.
Amount
– The amount is shown right justified in the display. The amount capacity is 7 digits.
Other Symbols
Other symbols may appear in the display (left justified) during operation.
These symbols clear automatically when you start the next entry or press the
[C]
Clear key.
DISPLAY TIME
Press
[QTY TIME] (When no live entry exists)
to display the current time. (Time will display if the time has been
programmed). Time is entered and displayed in 24 hour format. Time is automatically cleared upon entry.
NOTE: An error will occur if the QTY/TIME key is pressed during a transaction. Press
[C]
to clear the error.
(Change)
– Indicates the amount of change due to the customer.
(Minus)
– Indicates the amount displayed is negative.
(Subtotal)
– Displays the subtotal, including tax if applicable.
(Total)
- Displays the total.
(Error)
– Indicates an error. An error tone will sound to alert the operator.
SEC Code
- Displays when a security code is required and entry is attempted in either the Program
(PRG) or Z modes without entry of the security code.
Summary of Contents for MR-180
Page 18: ...14...
Page 29: ...25 1 3 RA 0 000...
