GETTING STARTED
WHAT’S IN THE BOX
• 2x Digit LED segments
• 2 x Digit mounting brackets with 3M Command
damage-free adhesive strip (preinstalled on each segment)
• 2 x Digit 3” connector cables
• 1 x Digit 6” connector cables
• 2 x Replacement 3M Command damage-free adhesive strips
• 1 x Quick Start Guide
• 1 x Design Guide
This product is an ADD-ON PACK. It is an expansion to add
segments to your existing Digit Starter Kit. If your Digit is already
setup, you do not need to reset or repair your controller!
If you need assistance with your starter kit,
please visit our website to reference the
Digit MLB7-1035 quick start guide.
WHAT DO YOU NEED?
ANYTHING ELSE?
If you really want to be precise during installation, you can use
a level, but it’s not required.
Thank you for choosing the Digit 3D LED Art Panels by Monster
Smart Illuminessence. This
Quick Start Guide
will help you with
the installation of your add-on device.
TIP:
Save these instructions for future reference.
monsterilluminessence.com/manuals/
SET UP YOUR DIGIT STARTER KIT FIRST.
scan for manuals
1