background image

TROUBLESHOOTING

HAVING TROUBLE WITH SETUP?

Don’t return this product to the retailer, we’re here to help.  

Please call for customer support: 866-246-2008

For other frequently asked questions please visit our 

website at www.monsterilluminessence.com

Q:  None of my segments are lighting up, what should I do?

Check that the power adapter is connected securely both to the 
controller and to a powered outlet.  The LED indicator should 
illuminate if it is powered and paired to Wi-Fi.
Ensure that the 

GREEN controller plug 

is securely connected to 

the first segment and that it is the 

ONLY 

green plug connected.

Q:  What if the LED colors don’t line up between segments?

Pointing the directional arrows on the back of each segment 
towards or away from each other will create different lighting 
effects when they are combined. Try rotating some segments.

NOTE:

  

Take care to hold down neighboring segments when 

removing one.  Always ensure all connections are secure.

Q:  I’ve added add-on kits, why are the LEDs flickering?

1 Digit Power Kit can run up to 10 Digit Segments (1 x Starter Kit + 
3 x Add-on Packs). Adding more than 10 x Segments will require 
grouping in an additional Power Kit to maintain normal operation.

Q:  Why are only some of my segments not lighting up?

To ensure all segments light up, make sure all the cables 

always point the GREEN side AWAY from the controller.

If you’ve just added a segment, try turning Digit off and on again. 

Q:  Why is my device failing to connect to my Wi-Fi network?

Make sure your phone or tablet is successfully connected to 
the 

2.4GHz Wi-Fi network

 

that your device will be placed on.

You may first need to enable and allow location services on 
your phone or tablet to find nearby devices. 
If your Wi-Fi network is a mixed 2.4GHz/5GHz network, try 
using AP pairing mode for better results.
If you still have issues with your mixed network, you may need 
to access your router settings and/or call your Internet Service 
Provider to create a separate 2.4GHz network.

A1: 

A2: 

A1: 

A1: 

A1: 

A2: 

A1: 

A2: 

A3: 

A4: 

5

6

Summary of Contents for DIGIT MLB7-1039-RGB











Reviews: