background image

2

This SuperThin mount is designed to mount 42"– 63" 
(106 – 160 cm) flatscreen televisions to vertical walls. 
Maximum weight capacity is 120 lbs. (54.43 kg). 

SUPERTHIN

 LaRgE TILT MOUNT

Before installing, carefully review the instructions 
to ensure that no parts are missing or defective. 
Improper installation can cause damage or serious 
injury. Do not use this product for any purpose not 
explicitly specified by Monster or the manufacturer. 
Neither Monster nor the manufacturer can be liable 
for damage or injury caused by incorrect assembly, 
incorrect mounting or incorrect use.

All hardware is supplied for the following wall 
conditions: Wood stud, brick, solid concrete and 
concrete block.

Note: The supplied hardware is not for steel stud 
walls. If you are uncertain about the nature of your 
wall construction, consult an installation contractor.

SaFETy waRNINg

 

If you don’t understand these directions, or are 
unsure of how to install this product installation, 
please call a qualified contractor or contact Monster 
Cable Products, Inc.

If you bought the Product in the United States, Latin 
America (Mexico 011-882-800-8989), or Asia Pacific 
(China 400-820-8973), contact Monster, LLC (455 
Valley Drive, Brisbane, CA 94005) at 1 877 800-8989. 
If you bought the Product anywhere else, contact 
Monster Technology International Ltd., Ballymaley 
Business Park, Ennis, Co. Clare, Ireland. You can write 
or use one of the following telephone numbers: 
Canada 866-348-4171, Ireland 353 65 68 69 354,  
Austria 0800296482, Belgium 0800-79201, Czech 
Republic 800-142471, Denmark 8088-2128, Finland 
800-112768, France 0800-918201, Germany 
0800-1819388, Greece 00800-353-12008, Italy 
800-871-479, Netherlands 0800-0228919, Norway 
800-10906, Russia 810-800-20051353, Spain 
900-982-909, Sweden 020-792650, Switzerland 
0800834659, United Kingdom 0800-0569520.

Important Notice 

Monster intends to make this manual accurate and 
complete, however, Monster makes no claim that 
the information contained herein covers all details, 
conditions or variations, nor does it provide for 
every possible contingency in connection with the 
installation or use of this product. The information 
contained in this document is subject to change 
without notice or obligation of any kind. Monster 
makes no representation of warranty, expressed 
or implied, regarding the information contained 
herein. Monster assumes no responsibility for 
accuracy, completeness or sufficiency of the 
information contained in this document.

Summary of Contents for Flatscreen SUPERTHIN




















Reviews: