background image

SPECIFICATIONS TABLE

PRODUCT MODEL NUMBER

WARRANTY PERIOD FOR PRODUCT

MPC FX IM-MB1

Two (2) Years

 

FORMAL WARRANTY CLAIM

HOW TO MAKE A CLAIM. 

(1) Call, or write to, Monster within two (2) months after You discover a 

Product Defect (or should have discovered it, if such Product Defect was obvious); (2) Give a detailed 

explanation of how the damage occurred; (3) Obtain a Return Authorization Number; (4) Upon receipt 

of a claim form (which may be sent to You after You filed Your Formal Warranty Claim), fill out the 

claim form entirely; (5) Return the Products, shipping prepaid by You (to be refunded if You are entitled 

to a remedy under the Scope of this Limited Warranty), to Monster for verification of damage, along 

with a copy of Your original sales receipts and proof of purchase (UPC label or packing slip) for such 

Products, the completed claim form, and printed Return Authorization Number on the outside of the 

return package (the claim form will include instructions for return).

TOLL-FREE TELEPHONE NUMBERS

. United States: 1-877-800-8989 (toll-free), or 1-415-840-2000.

ADDRESS:

 Monster Cable Products, Inc. 455 Valley Drive, Brisbane, CA 94005 USA 

FURTHER PROCEEDINGS. 

Monster will determine whether a Product Defect existed. Monster may, at 

its discretion, direct You to obtain a repair estimate at a service center. If a repair estimate is required, 

You will be instructed on how to properly submit the estimate and the resulting invoice to Monster for 

payment. Any fees for repairs may be negotiated by Monster. 

TIMING. 

If You bring a Formal Warranty Claim and fully comply with all terms and conditions of this 

Limited Warranty, Monster will use its best efforts to provide You with a remedy within thirty (30) 

days after receipt of Your Formal Warranty Claim (if You reside in the United States - forty-five (45) 

days if You reside elsewhere), unless obstacles outside Monster’s control delay the process.

Ver.12/14/2004 – US ©2006 Monster Cable Products, Inc.

Summary of Contents for ICRUZE INTERFACE CABLE MPC FX IM-MB1

























Reviews: