04
EN
Intel® Optane™ Setup
Intel® Optane™
is a combination of a compatible memory device and
Intel Rapid Storage
Technology software.
This combination is designed to speed up your system performance
by caching boot data, executables, frequently accessed data and system page files to a non
volatile, low latency Intel® Optane™ SSD.
Contact your distributor or supplier to see if your system supports this technology.
If you are reinstalling a system that has previously been setup in Intel RST Premium mode,
make sure you have disabled the Intel Optane Memory.
Intel® Optane™ Setup Procedure
You need to setup
Intel® Optane™
before installing your
Windows 10
operating system,
and you will need to prepare the following in order to do so.
•
The
Microsoft Windows 10 OS DVD or USB flash drive.
•
An Intel® Optane™ SSD installed in your system.
•
The
Device Drivers & Uti User’s Manual
disc.
System Software
Your computer may already come with system software pre-installed. Where this is not the
case, or where you are reconfiguring your computer for a different system, you will
find this manual refers to
Microsoft Windows 10.
Intel® Optane™/RAID Support
Note that your system can be set up as a RAID OR to support Intel® Optane™, but it cannot
be set to support both systems. You need to setup Intel® Optane™ or RAID before installing
your Windows 10 operating system.
Figure 1
Opening the Lid / Computer with
Dual AC/DC Adapters Plugged-In
6.
Use one hand to raise the lid to a comfortable viewing angle (do not exceed 130 degrees);
use the other hand (as illustrated in Figure 1) to support the base of the computer (
Note:
Never
lift the computer by the lid).
7.
Press the power button to turn the computer “on”.
Summary of Contents for SEMRUK S7 V7.1
Page 90: ...TURKEY UAE CYPRUS GERMANY...