DIN EN ISO 13688:2013
protective clothing
- General requirements
EN
Declaration of conformity*:
Features
: These garments are Personal Protective Equipment (PPE).
They bear the CE marking as they comply with the requirements of the
Regulation (EU) 2016/425 (and following amendments) implemented by
issuing within the Official Register of the European Union by March 9th,
2016 relevant to Personal Protective Equipment. Moreover, these
garments comply with the requirements of the European Technical
Standards EN ISO 13688:2013 “General Requirements” (Source of
Information: Beuth-Verlag GmbH, 10787 Berlin, www.beuth.de).
(*The complete declaration of conformity, you can find at:
www.big-
arbeitsschutz.de
)
article
description
available sizes
3388
4Protect softshelljacket,
MONTANA, black
XS, S, M, L, XL, XXL,
3XL, 4XL, 5XL
PPE category I:
Performances:
This garment is suitable to be used in presence
rainy and cold weather.
USER INSTRUCTION MANUEL
4Protect weather-protection clothing
ATTENTION: Read carfully before use!
6
7
Identification and selection:
The selection of suitable garments
must be made, based on the specific workplace requirements, the
type of hazards and the relevant environmental conditions. The
employer is responsible for the identification and selection of the
suitable and adequate PPE. Therefore it is opportune to verify the
suitability of this garment to your requirements before use.
Warnings:
Make a visual check of the garment before use, to verify it
is in perfect conditions, clean and intact and do have shows any
damages. In case of visible damages (e.g. unstitched or broken
seams, breaks, flaws) the garment must be replaced. All closing-
elements must be functioning. The garment can fulfil the purpose of
protection only, if wearing correctly and in sound condition. It must be
stressed out, that the identified technical standards of the PPE might
be impacted by abraison, washing or staining.
Alteration of PPE is not allowed. Preserve this user-instruction
manuel throughout the entire life of PPE. We decline any
responsibility for possible damages and/or consequences arising from
improper use.
Instruction of use: If the garment is damaged, please do NOT
repair, but change to a new one.
Instructions for storage, maintenance and transportation
: Store in
the original packing, protected from sources of light and heat sources
(e.g. sun). The garment must be preserved in a dry place. Avoid the
contact with solvent which might cause alteration of the products
features. For transportation, do not take garments out of the original
packing, but keep them in.
3390
4Protect softshelljacket,
MONTANA, grey/black
XS, S, M, L, XL, XXL,
3XL, 4XL, 5XL
This PPW offers NO protection from:
- chemical hazards
- caught-in hazards in presence of moving parts
- mechanical hazards
- thermal hazards
- fire crossing and extinguishing hazards
- all hazards, different from the above specified
3391
4Protect softshelljacket,
MONTANA, navy/black
XS, S, M, L, XL, XXL,
3XL, 4XL, 5XL
