2-way, bi-amplifed, active loudspeaker systems
Specifications
TANK101A
TANK121A
Enclusure
vented 2-way; biamped
vented 2-way; biamped
• Components
custom designed
custom designed
- bass
10” shielded neodymium magnet woofer (2.5“ voice coil) 12” shielded neodymium magnet woofer (2.5“ voice coil)
- mid/high
1” shielded compression driver (1" voice coil)
1” shielded compression driver (1" voice coil)
loaded by a 80° x 60° horn
loaded by a 80° x 60° horn
• Frequency response
65 Hz ÷ 20 kHz ± 2dB
50 Hz ÷ 20 kHz ± 2dB
bass: 65 Hz ÷ 2 kHz; mid/high: 2 kHz ÷ 20 kHz
bass: 50 Hz ÷ 2 kHz; mid/high: 2 kHz ÷ 20 kHz
• Active electronic x-over 2000 Hz / 24 dB/oct
2000 Hz / 24 dB/oct
• Sensitivity
98 dB SPL @ 1W/1m on axis
100 dB SPL @ 1W/1m on axis
• Max. SPL
123 dB
125 dB
Built-in amplifiers
2 MosFet, class AB, dedicated power units;
2 MosFet, class AB, dedicated power units;
2 independent dynamic processors;
2 independent dynamic processors;
‘soft start’ circuit; self-diagnostic.
‘soft start’ circuit; self-diagnostic.
• Max. output power
330 W EIAJ
330 W EIAJ
- bass
300 W (4 Ohms / 0,1% THD)
300 W (4 Ohms / 0,1% THD)
- mid/high
30 W (8 Ohms / 0,1% THD)
30 W (8 Ohms / 0,1% THD)
• Input sensitivity
micro: -20dBu; line: 0 dBu
micro: -20dBu; line: 0 dBu
• Noise referred to input - 108 dB (A weighted)
- 108 dB (A weighted)
• Input impedance
micro: 2 kohm; line: 22 kohm
micro: 2 kohm; line: 22 kohm
Connections
balanced input (Neutrik Combo
®
)
balanced input (Neutrik Combo
®
)
balanced LINK output (XLR)
balanced LINK output (XLR)
Construction
15 mm birch multiply; anti-scratch paint
15 mm birch multiply; anti-scratch paint
steel protection grille
steel protection grille
Fittings
speaker stand adaptor; carrying handle
speaker stand adaptor; carrying handle
Dimensions / Weight
W 46.4 x H 32.5 x D 32.5 cm / 16 kg
W 51.2 x H 36 x D 43.5 cm / 19 kg
APPENDIX
24
