active subwoofer
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
__________________________________________
INDEX
Introduction
Description
Control and connection panel
Connection examples
Important !!!
Appendix
◗
Specifications
◗
Connectors
◗
Connection examples
◗
Spare parts
11
11
12
13 - 14
15 - 17
26 - 29
26
26
27 - 28
29
ENGLISH
10
ENGLISH
The lighting flash with arrowhead symbol within an equilateral triangle, is intended to alert the
user to the presence of uninsulated 'dangerous voltage' within the product's enclosure, that
may be of sufficient magnitude to constitute a risk of electric shock to humans.
The exclamation point within an equilateral triangle, is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions.
PACKAGE CONTENTS
◗
Active subwoofer
◗
Power supply cable
◗
Owner’s manual
◗
Warranty certificate
◗
CE declaration of conformity
IMPORTANT !
SAFETy INSTruCTIONS
WARNING
In order to protect your own and others' safety and to avoid
invalidation of the warranty of this product, please read this section
carefully before operating this product.
- This product has been designed and manufactured for being operated as an active
speaker system in the applications tipical of a sound reinforcement system or of a
sound recording system. Operation for purposes and in applications other than these
has not been covered by the manufacturer in the design of the product, and is
therefore to be undertaken at end user's and/or installer's sole risk and responsability.
- This unit conforms to Class I insulation requirements, and for safe use it is required
that the protective earth contact is connected to a grounded (earthed) outlet.
TO AVOID THE RISK OF FIRE AND/OR ELECTRIC SHOCK:
•
Never expose this product to rain or moisture, never use it in proximity of water or
on a wet surface. Never let any liquid, nor any object, enter the product.
In case, immediately disconnect it from the mains supply and refer to servicing before
operating it again. Never place burning candles or other sources of open flame on
top of the device.
•
Before connecting this product to the mains supply, always make sure that the
voltage on the mains outlet corresponds to that stated on the product.
•
This product must be connected to a grounded mains outlet complying with the
safety regulations in force, using the supplied power cable. In case the power cable
needs to be substituted, use exclusively a cable of the same type and characteristics.
•
For US and CANADA only: do not defeat the safety purpose of the grounding-type
plug. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. When the provided plug does
not fit into your outlet, consult an electrican for replacement of the obsolete outlet.
•
This device is connected to the power line even when the mains switch is in the '0'
(off) position and the power indicator is off. As long as it is plugged in there are
dangerous electrical potentials inside the device, so, before undertaking any sort of
maintenance work etc, always make sure it has been unplugged from the mains socket.
•
Never place any object on the power cable. Never lay the power cable on a
walkway where one could trip over it. Never compress or pinch it.
•
Never install the product without providing adequate airflow to cool it.
Never obstruct the air intake openings. Leave enough room to get to the mains
power socket and the mains connector on the back panel.
•
In case the external fuse needs replacement, substitute it only with one of the same
type and rating, as stated on the product.
•
Always make sure the Power switch is in its '0' (off) position before doing any work
on the connections of the product.
•
Before attempting to move the product after it has been installed, remove all the
connections.
•
To disconnect the power cable of this product from the mains supply never pull
the cable directly. Hold the body of the plug firmly and pull it gently from the mains
supply outlet.
CAUTION!
This product does not contain user serviceable parts.
To prevent fire and/or electrical shock, never disassemble it or remove
the rear panel. For maintenance and servicing always refer to the official
Montarbo Distributor in your Country or to qualified personnel
specifically authorised by the Distributor.
- Before placing the product on a surface of any kind, make sure that its shape and
load rating safely match the product size and weight. Never attempt to hang the
product by any means not expressly provided or approved by the manufacturer (i.e.
ropes, chains, belts or whatever medium, throgh carring handles, bolts, hooks or
whatever). In case the product is factory-fitted with specific mounting hardware,
always verify before installation that the lifting and/or hanging system you intend to
use is of a proper type and can carry the product weight with the safety ratio required
by the regulations in force.
-
To avoid shocks, kicks, or whatever accidents, always set aside a protected area with
no access to unqualified personnel as an installation site for the product. If case the
product is to be used near children or animals, close supervision is necessary.
-
This product can generate very high acoustic pressures which are dangerous to the
hearing system. Always avoid operation at loud levels if anyone is excessively near to
the product.
Never expose children to high sound sources.
