Monte Carlo Fan Company 5DCR60XX Series, Owner'S Manual And Installation Manual

© 2011 Monte Carlo Fan Company

4/20/2012

3

Before you begin installing the fan, Switch power off

at Service panel and lock service disconnecting means

to prevent power from being switched on accidentally.

When the service disconnecting means cannot be

locked, securely fasten a prominent warning device,

such  as a tag, to the service panel.

1

Warning

-Risk of fire, electric shock, or person-

al injury. The fan in this box may be either

directly supported from a structural framing

member of a building and/or may be mounted

to an outlet box marked acceptable for fan sup-

port of of 31.8kg (70 lbs) or less. Most outlet

boxes commonly used for the support of lummi-

naires may not be acceptable for fan support

and may need to be replaced. Consult a quali-

fied electrician if in doubt. 

2

OUTLET BOX METHOD

Secure mounting plate directly to a joist from

the buliding structure via the two knock out

holes on the outlet box. Use only the appropri-

ate wood screws and washers included with

your fan. Caution: Wood screws must go

through into the building joist.

5

Outlet box

Mounting

Plate

Wood

Screws

BUILDING STRUCTURE METHOD

Remove the 

6

 screws attaching the Mounting

neck the mounting plate.  Retain the 

6

 screws

for re-assembly.

4

Install the mounting Plate to approved fan

brace and box combination use only the hard-

ware provided with the fan brace and box.

6

FAN BRACE AND BOX METHOD

Remove Safety bar from mounting bracket by

loosing screws, sliding bar to side, and lifting it

off the 2 screws.

3

Remove the keeper pin and cotter pin.

9

Lift mounting neck to mounting Plate and align

screws. 

7

Secure mounting neck to the mounting plate

with 

6

 screws to become a complete mount-

ing bracket.

8