Monte Carlo Fan Company 5YK52 Series, Owner'S Manual And Installation Manual

3

© 2018 Monte Carlo Fan Company

10/2018

1

2

3

4

5

6

ON

OFF

ON

OFF

Before you begin installing the fan, Switch 

power off at Service panel and lock 

service disconnecting means to prevent 

power from being switched on 

accidentally. When the service 

disconnecting means cannot be locked, 

securely fasten a warning device, such  

as a tag, to the service panel.

Use AC 120V/60HZ power supply 

only.

Before installing this fan make sure the 

outlet box is properly installed to the 

house structure. To reduce the risk of 

fire, electric shock, or personal injury, 

mount to outlet box or supporting system 

acceptable for fan support. 

(Mounting must support at least 35 lbs.)

Use metal outlet box suitable for fan 

support and use only the screws provided 

with the outlet box  (must support 35 lbs). 

Before attaching fan to outlet box, ensure 

the outlet box is securely fastened by at 

least two points to a structural ceiling 

member ( a loose box will cause the fan to 

wobble). Remove the two outlet box 

screws provided with the box, aligning 

the holes of the mounting bracket with 

the holes of the outlet box. Reinstall the 2 

outlet box screws securely.

Partially loosen downrod set screws from 

yoke at top of motor assembly.

Remove preassembled cross pin and 

keeper pin from downrod. 

Place downrod over canopy, canopy 

bottom disc and yoke cover. Thread lead 

wires and safety cable from motor 

assembly through downrod.

Slip downrod into motor housing yoke, 

aligning holes and install cross pin and 

keeper pin. 

Insert cross pin through yoke and downrod 

until point appears on the other side, and 

insert keeper pin on cross pin. 

Pull the downrod up tight against the 

cross pin, and then evenly tighten the 

downrod set screws on motor housing 

yoke.

Place yoke cover on top housing of fan.

Warning

: Cross pin and keeper pin must 

be installed securely, failure to install them 

will result in serious injury.

Mounting bracket

Downrod

Cross pin

Keeper pin

Downrod Mount Installation

Canopy

Downrod

Canopy bottom disc

Yoke cover

Cross pin

Keeper pin