Monte Carlo Fan Company Prairie 14PRR52 D Series, Owner'S Manual And Installation Manual

5

© 2018 Monte Carlo Fan Company

05/2018

11

12

13

14

15

16

Partially loosen one and remove one 

preassembled screw from mounting 

bracket. Save screw. 

Install blades, aligning the holes of blade 

bracket and blade.

Install blade bracket with blade by blade 

setscrews and washers provided. Tighten 

screws securely. Repeat this process for 

remaining blades.

Install the blade assembly to motor using 

the preinstalled screws. Tighten screws 

securely. Repeat this process for 

remaining blade assemblies.

Loosen 2 and remove 1 preassembled 

screw from the plate on motor. Save 

screw for later use. 

Place light pan over the light lead wires 

and attach it onto the plate on motor, 

aligning the keyhole slots on the light pan 

with the preassembled screws on the 

plate. Twist clockwise till lock. 

Reinstall the screw removed in step 15. 

Tighten all screws securely.  

Lift canopy up, aligning its keyhole slot 

with the preassembled screw on 

mounting bracket and twist 

counterclockwise to lock in place. 

Reinstall the screw removed in step 11 

and tighten all screws securely.

Attach canopy bottom cap onto canopy 

by aligning its notch with the screws on 

mounting bracket and twist clockwise till 

tight. 
  

Blade

Blade bracket

Set screw

Washer

Plate on motor

Light pan