Windshield
A clean windshield is important. The windshield requires special
cleaning to prevent scratches to the surface. Use a mild soap solu-
tion and damp cloth only. Harsh detergents, solvents, chemicals or
dry cloths will scratch the surface.
Bilge
Your bilge accumulates oil and greasy dirt over a period of time
and should be cleaned out. Usually, ordinary soap and water does
not remove the accumulation, and something stronger is neces-
sary. Consult your dealer for recommendations on special bilge
cleaning products.
Teak
Teak does not require refinishing, but should be cleaned occasional-
ly with a teak cleaner, which can usually be found at a marine supply
store. The best way to keep teak in top condition is to oil it regularly
with teak oil, at least twice a year. Follow manufacturer’s instructions
and warnings carefully as some cleaners or oils may damage gel-
coat, vinyl or aluminum. Avoid rust-producing steel wool pads when
cleaning. Scotchbrite or similar nonmetallic pads are recommended.
Teak sealers can be harmful to other materials. Make
sure you thoroughly remove any of this oil that has
come in contact with the vinyls, gelcoats, etc. Teak
should not be varnished as the natural oils will cause
poor adhesion.
Interior Wood
Most interior wood is teak. If a scratch develops, it can be repaired
easily using a fine grade sandpaper (400 to 1000 grit). Use a tack
cloth to clean sanding residue, and then apply a small amount of
lemon oil. Let dry and wipe with a soft cloth.
Plexiglass
Plexiglass is susceptible to scratching. When cleaning, always apply
clean, lukewarm water and wipe with a soft, lint-free cloth. DO NOT
use the following:
●
Abrasive cleaners
●
Solvents
●
Glass cleaning solutions
●
Acetone, benzene, gasoline
●
Dry cleaning fluids
●
Alcohol or carbon tetrachloride
!
CAUTION
CARE AND MAINTENANCE
7-7
Summary of Contents for 268 SC Sport Cruiser
