63
Maintenance
Adding coolant
1.
If the coolant level drops below the neck of the
fi ller hole, add the recommended coolant
(
2
P. 45) until the level reaches the neck of
the fi ller hole.
2.
Remove the upper radiator mounting bolt.
3.
Move the upper part of the radiator forward
and remove the radiator cap.
u
Fill until the level reaches the neck of the
fi ller hole.
u
Make sure no foreign bodies enter the
radiator during the fi lling procedure.
2
WARNING
Removing the radiator cap while the
engine is hot will allow the coolant to
spray out, seriously scalding you.
Always let the engine and radiator cool
down before removing the radiator
cap.
Changing the coolant
Unless you have the proper tools and necessary
mechanical skills, have your dealer change the
coolant.
Coolant
