11
12
13
1
•
888
•
557
•
3848
Wards.com
1
•
888
•
557
•
3848
Cleaning and Care
Operating Instructions
(cont’d)
To use the remote control, you must be within 20 feet of the unit with a clear line of
sight. Remove batteries when control is not in use for long periods of time.
Sleep Mode:
The AC must be in Cool Mode prior to using the Sleep Mode. When the Sleep Mode
has been activated, the temperature set in the unit will increase 2˚ F one hour after
Sleep Mode has been turned on and will increase another 2˚ F one hour after that.
During Sleep Mode, the Fan Speed will automatically switch to LOW.
WARNING: Turn AC OFF and remove plug from outlet prior to cleaning.
Air Filter Cleaning:
The air filter should be checked at least twice a month to see if cleaning is warranted.
Dust and dirt can build up in the filter and block airflow, which decreases the cooling
capacity and can cause an accumulation of frost on the cooling evaporator.
To clean the filter:
1. Using the handle on the right side of the front grill pull air filter straight out.
2. Wash filter under warm tap water. Do not soak or use any detergent. Shake off
water before replacing filter.
Air Conditioner Cleaning:
To clean the front grill and air inlet, wipe with a soft cloth dampened with mild soap
or detergent. The cabinet may also be washed with mild soap or detergent and
lukewarm water.
To keep your air conditioner running at peak efficiency, the condenser coils on the
back (outside) of the unit should be checked periodically for embedded debris. Brush
or vacuum condenser coils to remove debris from fins.
Increase Temperature
Only works in Cool Mode. Press-
ing and holding will increase temp
1˚ F every 0.6 seconds with range
being 61˚ F - 88˚ F.
Decrease Temperature
Only works in Cool Mode. Press-
ing and holding will decrease
temp 1˚ F every 0.6 seconds with
range being 61˚ F - 88˚ F.
Power AC
On or Off.
Operation Mode
Press to select Cool > Fan > Cool
Fan Speed
Press to change fan speed to
low > medium > high > low
Timer Increase
–
See instructions
under Control Panel Functions.
Timer Decrease
–
See instructions
under Control Panel Functions.
Sleep Mode
Press to start or stop sleep function.
Energy Saver
Used to start or stop Energy Saver
Mode which is only functional when
Cool Mode is set to ON.
