Page 51
XG0514-150204
I-Series Indoor Gas Fireplace
Maintenance
Window Cleaning / Screen Removal
All units are supplied with a Safety Barrier (screen) to prevent
accidental touching of the hot glass. Glass doors however do
require periodic cleaning. How often they need to be cleaned
depends on several factors like how often the appliance is run,
the prevailing temperatures in your area or even air quality. When
cleaning the Window, you should clean both the inner and outer
surfaces. In order to clean the outer surface, you will need to
remove the Safety Barrier.
Figure 25 Sec.6
1).
Remove the Fireplace Door. See the section on Setup for details
on door installation and removal.
Figure 26 Sec.6
2). On a flat work surface, place the Door with the Safety Barrier
facing up. Remove 4 screws that attach the Safety Barrier to the
Firebox Door.
3)
. Lift the Safety Barrier away from the Firebox Door.
Figure 27 Sec.6
4).
Using a non-abrasive cleaner, such as White-Off or Kel Kem,
clean both the inner and outer surface of the Window.
Figure 28 Sec.6
5).
Re-install the Safety Barrier and the Firebox Door in the reverse
order they were removed.
