Divine Outdoor Gas Fireplace
Page 15
XG0150 - 140707.2
Installation
Section:
Step 1).
The RTSCH**VO Screen Installation Kit con-
tains two mounting brackets. One for each side of the
Screen Assembly.
Step 2).
The lower portion of the mounting brackets can
be identified by the small cutout and brass nutsert. The
top contains a tab which is used for aligning the bracket.
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Step 3).
Align the cutout on the bottom of the left bracket
with the lower, left corner of the fireplace.
Installing the Screen
Step 4).
Align the tab on the top of the left bracket so
that it is flush with the outer edge of the fireplace.
Bottom
Top
Left
Right
Tools Required
• Drill / Driver
• Phillips Screwdriver
•
1/4
" Hex driver
•
1/8
" drill bit (Optional)