37
Installation
XG0228 - 021419
Air Inlets
Fireplace Base
Log E
Air Inlets
Fireplace Base
Log D
Air Inlets
Fireplace Base
Log C
Log B
Traditional Logset Installation H38DF
Traditional Logset Installation H42DF
Air Inlets
Pilot Assembly
Fireplace Base
Rear / Bottom Log
Notch in Log
Log A
STEP 2:
Place the bottom Right log (Log B) and bottom Left Log,
(Log C)
STEP 2:
Place the bottom Right and Left logs as shown. Never
block Air Inlets or Pilot when placing logs or embers.
STEP 3:
Install Both front base logs, (Figure 28c) on the log stands
provided.
STEP 3:
Carefully place the Top Right log using the four alignment
pins protruding from the top of the Right and Left Bottom Logs.
STEP 4:
Place Front Left log (Log D)
STEP 5:
Place Front Left log (Log F) as shown. Set notch in lower
end of Log F against stile on Log Grate
STEP 4:
Place the Centre Front log using the notch cast in the
Bottom Rear log. Place the Right Centre log as shown
STEP 1:
Remove the glass door as described in the previous
instruction. Place the bottom Rear log (Log A)
STEP 1:
Remove the glass door as described in the previous
instruction. Place the bottom Rear log
AIR INLETS
AIR INLETS
AIR INLETS
AIR INLETS
AIR INLETS
AIR INLETS
BASE
PILOT
PILOT
NOTCH IN LOG
Figure 22.
H38DF*'s Fireplace Base.
Figure 23.
H42DF*'s Fireplace Base.
Figure 22.b
Figure 23.b
Figure 22.c
Figure 23.c
Figure 22.d
Figure 23.d
Fireplace Base
Log F
