38
Installation
XG0228 - 021419
Wildfire Logset Installation HW38DF
Wildfire Logset Installation HW42DF
STEP 2:
Place the back left log on top of the bottom left log, while
resting the right side of the log on the mounting tray.
STEP 2:
Place front Left log (Log B) and front right log (Log C).
Place Log C knot hole as shown.
STEP 3:
Place the top right log, align the tab on the underside of
the log, far right end, with the notch in the bottom right log
STEP 3:
Place the Long front Left log (Log D) angle log with knot
pointing inward toward centre of firebox. Place the Long front
Right log (Log E) angle log with knot pointing outward toward
front of Fireplace.
STEP 4:
Rest the top log in the provided notch on top of the Top
right log
STEP 4:
Place the Remaining two Front logs (Log F) & (Log G).
Space Logs evenly with log feature direction as shown.
STEP 5:
Ember placement, (fill voids between front logs and
along the front of the grate / pan).
STEP 1:
Remove the glass door as described in the previous
instruction. Place the bottom left and right logs as shown
STEP 1:
Insert the rear log. Locate the retaining bracket and slide
bracket behind Rear Log retaining plate and fasten bracket to log
LEFT LOG
BACK LEFT LOG
TOP LEFT LOG
RIGHT LOG
BASE
F
G
Figure 24.
H38DF*'s Fireplace Base.
Figure 25.
H42DF*'s Fireplace Base.
Figure 24.b
Figure 25.b
Figure 24.c
Figure 25.c
Figure 24.d
Figure 25.d
