Page 38
H*38DF Gas Fireplace
XG0147 - 151123
Operation
Section:
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame system.
The fan speed can be adjusted through six (6) speeds. To
activate this function use the Mode Key, see Figure 35, to index
to the fan control icon, see Figure 44. Use the Up/Down Arrow
Keys to turn on, off, or adjust the fan speed. A single "beep" will
confirm reception of the command.
Accent Light Control
If the fireplace is equipped with variable accent lights. The
accent light function controls the Accent Lights. To activate this
function use the Mode Key, see Figure 32, to index to the accent
light icon, see Figure 45.
Pressing the Up Arrow Key will turn the light on at the lowest
setting. Continue pressing up to get brighter. Pressing the
Down Arrow Key will turn the lights down until you get to the
off position. A single beep will confirm the reception of the
command.
Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery, see Figure 42.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
....
down. See Figure 43.
3. To enable thermostat repeat steps 1-2. The remote screen
.....
will display 'set' while the thermostat button is held down.
Figure 42.
Figure 43.
Figure 44. Fan Speed Control
Figure 45.
Light Control
