background image

Page 2

HT34-PV Series Power Vent Gas Fireplace

Part No. XG0530 - 041510

Warning:

 

Read this manual before installing, operating or troubleshooting this 

appliance. Please retain this owner's manual for future reference.

Congratulations

Congratulations on selecting a Montigo gas fireplace, an elagent 

and well designed gas fireplace built to your specifications. The 

Montigo gas fireplace you have selected is designed to provide 

the utmost in safety, reliability, and engineering standards. 
As the owner of this new fireplace, you'll want to read and care-

fully follow all the instructions contained in this Installation, 

Operations and Maintenance manual. Pay special attention to all 

cautions, warnings, and Important warnings.

 

This owner's manual should be retained for future reference. We 

suggest that you keep it with all your other important documents 

and product manuals.
The information contained in this owner's manual, unless noted 

otherwise, applies to all models, and gas control systems.
Your new Montigo gas fireplace will give you years of durable, 

reliable use. Welcome to the Montigo family of gas fireplace 

products.

     

Safety Alert Key:

• DANGER!

  Indicates a hazardous situation which, if not avoided will result in death or serious injury.

• WARNING! 

Indicates a hazardous situation which, if not avoided could result in death or serious injury.

• CAUTION! 

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

• NOTICE: 

Used to address practices not related to personal injury.

  

Important: 

Used to address practices not related to personal injury.

Congratulations
Safety Alert Key
Introduction

 ............................................................................... 3

Installation

 

Installing and Framing the Fireplace .............................. 4

 

Installing the Gasline ...................................................... 5

 

Vent Installation .............................................................. 5

 

 

Installation Requirements .................................. 5

 

 

Vent Terminations .............................................. 6

 

 

Installing the Standoffs ...................................... 6

 

Converting Vent Runs .................................................... 7

 

Power Vent Runs ........................................................... 8

 

Finishing around the fireplace

 

 

Fireplace Facing ................................................ 8

 

 

Mantels and Surrounds ................................8 - 9 

 

Wiring   ....................................................................9 - 10

 

Removing and Installing the Door ......................... 10 - 11

 

Table Of  Contents

Operation

  .........................................................................12 - 14

Maintenance

  ....................................................................14 - 15

 

General ........................................................................ 14

            Troubleshooting ............................................................ 15
 

Spare Parts .................................................................. 15

Warranty

  ................................................................................. 16

Appendix

 

A. Termination Locations .............................................. 17

 

B  State of Massachusetts / Amendment ..................... 18

Notes: 

 

 ......................................................................... 19

Summary of Contents for HT34-PV Series





















Reviews: