Page 7
HT34-PV Series Power Vent Gas Fireplace
Part No. XG0530 - 041510
Installation
Converting to Top Vent/ Rear Vent
HT34-PV Top Vent
Use the following instructions to convert an
HT34-PV
for Top Vent use:
1. Install the 4" inner flue cap on the rear flue outlet and secure the
cap in place with five screws, as shown in
figure 7a
.
2. Install the flue gasket material and flue cover plate on the rear vent
outlet . Fasten the plate with four screws, as illustrated below.
3. Install the 4" inner flue collar and the 7" outer flue collar in place
on the top vent outlet using 5 screws, as illustrated below.
Figure 7a.
Flue cap installation for Top Vented fireplace.
Figure 7b.
Flue collar installation for Top Vented fireplace.
Figure 8a.
Flue cap installation for Rear Vented fireplace.
Figure 8b.
Flue collar installation for Rear Vented fireplace.
4” Inner Flue Cap
7” Outer Flue Cap
HT34-PV Rear Vent
Use the following instructions to convert an
HT34-PV
for Top Vent use:
1. Install the 4" inner flue cap on the top flue outlet and secure the
cap in place with five screws, as shown in
figure 8a
.
2. Install the 7" outer flue cap on the top flue outlet, and secure it
with five screws, as shown in
figure 8a
.
4” Inner Flue Collar
7” Outer Flue Collar
4” Inner Flue Cap
7” Outer Flue Cap
4” Inner Flue Cap
7” Outer Flue Cap
4” Inner Flue Cap
7” Outer Flue Cap
7” Outer Flue Collar
4” Inner Flue Collar
3. Install the flue gasket material and flue cover plate on the top
vent outlet. Fasten the plate with four screws as illustrated in
Figure 8b
.
4. Install the 4" inner flue collar and the 7" outer flue collar in
place on the rear vent outlet using five screws as illustrated
below.
