Installation
Page 6
XT0016 - 092214
Figure 17
Attach switch bracket to front of fireplace
D. Main ON/OFF Switch Installation:
1. Position the Main/off Switch bracket on the right leg of the
firebox as shown in
Figure 17 and Figure 18.
2. Using the two selftapping screws supplied attach the bracket.
See
Figure 18.
3. Feed the switch and the wires through the slot in the bracket as
shown and install the switch to the bracket. See
Figure 20
.
4. Secure the wires to the floor of the fireplace using the supplied
cable tie and cable tie mounts.
5. Attach the "Main ON/OFF" sticker supplied to the switch bracket.
Figure 18
Attach switch bracket to front of fireplace
Figure 19
Attach switch to bracket.
Figure 20
Attach switch to bracket.
