Page 6
Proflame 2 Transmitter
XG0677 - 141231
Operation
Figure 10.
Setting Room Thermostat
Smart Thermostat (Remote Control
........
Operation)
The Smart Thermostat function adjusts the flame height
in accordance to the difference between the set point
temperature and the actual room temperatures. As the
room temperature gets closer to the set point the Smart
FUnction will modulate the flame down. To activate
the function, press the Thermostat Key, see
figure
1
, until the word "SMART" appears to the right of the
temperature bulb graphic, see
figure 11
.
NOTE:
When smart Thermostat is activated, manual
flame height adjustment is disabled.
Figure 11.
Smart flame function
Fan Speed Control
The fireplace may be equipped with a hot air circulating
fans. The speed of the fan can be controlled by the
Proflame system. The fan speed can be adjusted through
six (6) speeds. To activate this function use the Mode
Key, see
figure 1
, to index to the fan control icon, see
figure 12
. Use the Up/Down Arrow Keys, see
figure 1
,
to turn on, off, or adjust the fan speed, see
figure 12
. A
single "beep" will confirm reception of the command.
Figure 12.
Fan Speed Control
Accent Light Control
The fireplace may be equipped with accent lights. The
auxiliary function controls the Accent Lights. To activate
this function use the Mode Key, see
figure 1
, to index to
the AUX icon, see
figure 13.
Pressing the Up Arrow Key will turn the light on. Pressing
the Down Arrow Key will turn the light off. A single "beep"
will confirm the reception of the command.
Figure 13.
Light Control
Room Thermostat (Remote Control
........
Operation)
The Remote Control can operate as a room thermostat.
The thermostat can be set to a desired temperature
to control the comfort level in a room. To activate the
function, press the Thermostat Key, see
figure 1
. The
LCD display on the remote control will change to show
that the room thermostat is "On" and the set temperature
is now displayed, see
figure 10
. To adjust the set
temperature press the Up or Down Arrow Keys until the
desired set temperature is displayed on the LCD screen
of the Transmitter.
