PVHFL58-300 Vertical Power Vent System
Installation
Conduit & Wiring clearances
Connect the power vent harness as outlined. Connect the wiring to
the fireplace as oulined in the schematic shown in
figure 4
. Ensure
that the proper clearances are maintained for the wiring and conduit.
When installing the wiring it must never run above the vent run and it
must be at least 1" clear of all venting.
1” Clearance
Wire
Figure 3.
Conduit and Wiring
Wiring Installation
Page 6
XG0519 - 031114
