background image

15

Appendix

XG0521 - 180904

MONTIGO RESIDENTIAL WARRANTY PROGRAM

Canadian Heating Products Inc. and/or Montigo DelRay Corp 

(collectively referred to herein as "The Companies"), warrants the 

Montigo gas appliance (referred to herein as 'the appliance') to 

be free from defects in materials and workmanship at the time 

of manufacture. The gas appliance and related components are 

further subject to the terms and conditions set forth below.

This warranty covers the following Montigo product series: 

Distinction, H, I, L, Linear P and PL, R and Mahana

Component

Coverage Period

Labor Coverage

Firebox, heat exchanger

15 years

1 year

Main burner

15 years

1 year

Gas control valve and related control components 

(pilot assembly, spark electrode flame sensors, 

thermopile)

1 year

1 year

Electrical components (internal blowers, ignition 
control module, wiring, switches, remote control 
systems, blower control module, accent bulbs)

1 year

1 year

Firebox media (logset, glass beads, river rocks)

1 year

1 year

Glass (thermal breakage)

1 year

1 year

Plated, painted finishes (including interior reflective 

glass)

1 year

1 year

Refractory lining

1 year

1 year

Mesh/Glass safety barriers

1 year

1 year

Power Vent Control box

1 year

1 year

Montigo Venting (excluding terminations)

15 years

1 year

QUALIFICATIONS TO THE WARRANTY

This Warranty only covers gas appliances installed in the United 

States or Canada.

To receive the benefits of this warranty, the appliance must 

be purchased, installed and serviced annually by a dealer 

authorized by the Companies for the warranty to be valid.

The gas appliance must be installed by a licensed professional 

in accordance with The Companies' installation instructions 

and local building codes. The warranty on the appliance covers 

only components manufactured by The Companies. The use of 

components manufactured or supplied by other manufactures 

and used in conjunction with the appliance could create serious 

safety hazards, may result in the denial of certification by 

recognized national safety agencies and could violate local 

building codes. Such use may untimely void this warranty. This 

warranty does not cover any damages occurring from the 

use of any components not manufactured or supplied by The 

Companies.

The appliance must be subjected to normal use. The appliance 

is designed to burn natural gas (NG) or liquefied petroleum (LP) 

only. Burning conventional fireplace fuels such as wood, coal or 

any other solid fuel will cause damage to the appliance, produce 

excessive temperatures will result in a fire hazard and void all 

warranties. This warranty is transferable. The appliance must 

remain in its original place of installation to be valid.

If the components of the appliance covered by this warranty 

are found to be defective within the time frame stated (see The 

Companies investigation of claims), the companies will, at its 

option, replace or repair defective components of the appliance 

manufactured by the company at no charge and will also pay for 

labor costs (in accordance with schedule) incurred in replacing 

or repairing components. If repair or replacement is not 

commercially practical, the companies will, at its sole discretion, 

provide a current or most like unit, excluding the cost of labor 

unless the labor is covered by the terms of the warranty.

This warranty covers only parts and labor as provided above. 

In no case shall the companies be responsible for materials, 

components or construction. All replacement or repair 

components will be shipped F.O.B. from the nearest Company 

factory. 

LIMITATION ON LIABILITY

It is agreed and understood that The Companies sole obligation, 

and purchaser's exclusive remedy under this warranty, under 

any other warranty, expressed or implied, or in contract, tort or 

otherwise, shall be limited to repair or replacement as specified 

above. The opinion of The Companies with respect to these 

matters shall be final.
In no event shall The Companies be responsible for any 

incidental or consequential damages caused by (but not limited 

to) improper installation, installation by an unqualified or 

unauthorized installer, accident, lack of regular maintenance, 

user error, abuse, misuse, Acts of God, power surges, floods, 

natural disasters, force majeure, defects in its appliance whether 

such damage occurs or is discovered before or after replacement 

or repair, and whether or not such damage is caused by The 

Companies negligence. Some jurisdictions do not allow the 

exclusion or limitation of incidental or consequential damages, 

so the above limitation or exclusion may not apply to you. The 

duration of any implied warranty with respect to the appliance 

is limited to the duration of the foregoing warranty. Some 

jurisdictions do not allow limitations on how long an implied 

warranty lasts, so the above limitation or exclusion may not 

apply to you.

Appendix B: Warranty

Summary of Contents for PVHIN47-200



















Reviews: