montpellier GH60BG, Installation And Operating Instructions Manual

1

0

Section 3. Operating the Appliance 

3.1. Igniting & Operating the Gas Burners 

-

Push in and turn the required burner control knob anti-

clockwise to the maximum heat setting (Large flame).

-

You will hear an audible click from the spark ignition.

-

Continue to maintain pressure on the control knob for a few

seconds after the burner has ignited and the flame is stable.

-

If you fail to maintain pressure on the control knob, the burner

will either not light or the flame will go out.

-

Once the flame is stable you can turn the burner down to a

lower heat setting, if required.

-

When you have finished using the burner, turn the burner

control knob back to the ‘off’ position and beware that the

burner and pan support will remain hot for a period of time.

3.2. Hot Burners and Pan Supports 

Please note that the gas burners, burner caps and pan supports 

will remain very hot for some time after the burner has been 

switched off. You must take care until the parts have cooled down 

completely. 

Never, clean the hob surface, burners and/or pan supports until 

they have cooled down completely.