background image

9

OPERATING THE REFRIGERATOR

Setting the Temperature Control

The appliance has one control for regulating the temperature. The temperature control is located 

on the upper right hand of the fridge interior compartment.

The first time you turn the unit on, adjust the temperature control knob to “6” and run for at least 2 

hours before putting items inside. This will ensure the cabinet is thoroughly chilled.

The range of the temperature control is from position "1" (the warmest) to "6" (the coldest). Adjust 

the temperature control to the setting that best suits your needs. Setting “4” should be appropriate 

for home or office use.

Turning the temperature control knob to “0” position stops the cooling cycle but does not shut 

off the power to the unit.

NOTE:

If the unit is unplugged or loses power, you must wait 3-5 minutes before restarting the it. 

If you attempt to restart before this time delay, the appliance will not operate.

Large numbers of items will lower the cooling efficiency of the appliance.

Do not place items on the air outlet and ensure to leave spaces for airflow.

If  you  choose  to  change  the  thermostat  setting,  adjust  thermostat  control  by 

one increment  at  a  time.  Allow  several  hours  for  the  temperature  to  stabilize 

between adjustments.

CARE AND MAINTENANCE

Cleaning the Refrigerator

Unplug the appliance and remove all items including shelves and racks.

Wash the inside surfaces with a warm water  and baking soda solution. The solution should be 

about 2 tablespoons of baking soda to 250ml of water.

Wash the shelves and racks with a mild detergent solution.

Rinse well and wipe dry with a clean soft cloth.  The external surfaces of the appliance should be 

cleaned with a mild detergent and warm water.

Wring excess water out of the sponge or cloth when cleaning the controls or any electrical parts.

Power Failure

Most power failures are corrected within a few hours and should not affect the temperature of the 

appliance if you minimize the number of times the door is opened. If the power is going to be off 

for a longer period of time, you need to take the appropriate steps to protect the contents of 

the cooler.

Summary of Contents for MAB2031

















Reviews: