EN
9
Important
Installation Instructions
1.
To avoid hazards due to instability of
the appliance, ti must be installed in
accordance with the instructions
2.
Do not operate this applliance unless
installed correctly
3.
The appliance should be located on a
smooth surface.To ensure that, your
appliance is standing level adjust the
four front and back feet by turning
clockwise or anti-clockwise, until
the product is in firm contact with
the floor. Correct adjustment of feet
avoids excessive vibration and noise.
4.
Refer to «Cleaning and Care» section
to prepare your appliance for use.
To avoid any loss in performance,
air suction channels should not be
obstructed. (140 cm2)
Minimum distance between the wall
and the appliance must be at least 10
mm.
5.
The appliance must be protected
against rain, moisture and other
atmospheric influences.
IMPORTANT:
Care must be taken
while cleaning / avoid touching the
bottom of the condenser metal wires at
the back of the appliance as you might
injure your fingers and hands.
IMPORTANT:
This appliance is not
designed for stacking with any other
appliance.When
positioning
your
appliance, take care not to damage
your flooring, pipes,wall coverings etc.
Summary of Contents for MBUF300
