2.2 Temperature Control
1
� -
l
- - - - - -
-High temperature warming indicator lamp
..-------Super-freeze indicator lamp
Indicator lamp display area
Temperature display area
entigrade temperature indicator lamp
��-.
&
*
°C
"F:
F
'
ahrenheit temperature indicator lamp
SUPER
@
-
s
-
uper-freeze/Lock/Unlock key
CID
•
li
emperature key
TEMP
Electronic control
► Display control
When you turn on the freezer, the display window will be on for 3s, and then it will enter normal
operation display, the original display shall be under 18
°
C;
Display of normal operation: CD if there is no failure, the set temperature or function mode
will be displayed; (2) if there is any failure, the failure code will be displayed;
Sleep function: the sleep function will operate by default after turning on the appliance, after the
temperature is confirmed, the display will extinguish after another 30s.
The sleep mode could be switched on/off via a combination of keys:
By pressing the key
and
for 5s simultaneously, when " ON " is displayed in the
temperature display area, it indicates the sleep function is active.
By pressing the key and for 5s simultaneously, when " OFF " is displayed in the
temperature display area, it indicates the sleep function is cancelled.
► Lock and unlock
After turning on the appliance the key will be in the lock state by default; it is required to unlock
before you can make any ad
j
ustments.
Unlock: after pressing the key
continuously for 3s, the display area will blink once to unlock. It is
required to conduct key operation after unlocking.
Lock: after pressing the key
continuously for 3s, the display area will blink once,and the set
temperature will take effect immediately once entering the lock state, the display area will not blink;
after no key operation for 30s, it could also enter automatic lock state, and the display area will blink
once.
7
( The picture above is only for reference. The actual configuration will depend on the product or
statement by the distributor )
O
peration control
:
S
leep function active
:
After confirming the temperature or any function,when active the display
area will extinguish after 30s;
S
leep function cancelled
:
After confirming the temperature or any function,when
S
leep
F
unction is
cancelled the display area will remain on.
