5
Section 1. Installation
-
IMPORTANT!
This appliance must be left to stand in an upright position for
at least 4 hours before being switched on for the first time.
-
Remove all packaging and securing tape from the appliance.
-
Wash the interior of the appliance with luke warm water containing a small
amount of bicarbonate soda (5ml to 0.5 litres of water).
-
Position the appliance in a dry atmosphere and out of direct sunlight.
-
Do not position next to a cooker or other sources of heat, i.e. radiator.
-
If positioned next to another fridge or freezer, leave a minimum gap of 2cm
between the appliances in order to avoid condensation.
-
Please ensure clearances as shown in the installation guide/diagrams.
-
Do not place or store heavy items on the top of this appliance.
-
Ensure that the appliance is positioned on a firm flat floor.
-
This appliance must be level. Adjust the level by screwing the adjustable
feet up or down (use your fingers or a suitable spanner).
-
Ensure that the appliance is upright and both feet are in firm contact with
the floor so that the cabinet is stable.
-
Connect the plug to an adjacent 13amp socket outlet and ensure that the
appliance is not standing on the supply cable.
-
For Built-in installation, continue as follows (Pages 6-9):
