10
C.
Freezer Temperature Display
In normal running this shows the actual temperature in the freezer
compartment. If the temperature in the freezer is higher than 0°C this
will flash, otherwise it will be static.
See below for how this display is used in setting the freezer
temperature.
D.
Super Freeze Display
The super freeze function can be used to freeze large quantities of
fresh food as quickly as possible. Fig 3 shows how this display looks
when the super freeze is switched on.
To switch on the super freeze function, push and hold the freezer
button (
E
) for three seconds.
Once the food is frozen, push and hold the freezer button (
E
) for three
seconds again to switch off the super freeze function.
IMPORTANT
Do not use the super freeze function for more than 24
hours at a time.
E.
Freezer Button
The freezer temperature is regulated by this button between -25°C
and -15°C in 1°C increments.
To change the temperature setting, press this button once so the
display shows the set temperature and flashes. While it is still flashing,
press this button several times until the required temperature is shown
on the display. Approximately 5 seconds after your last press of this
button the new temperature is set and the display changes back to
showing the actual temperature inside: it will continue to flash if the
actual temperature in the freezer is above 0°C, and until the actual
temperature falls below zero.
After changing the temperature
setting,the time taken to achieve the new temperature will depend
on how large the change form the previous setting.
