With the help of another individual, or two,
manoeuvre the appliance into the cabinet. There
are two metal plates at the base of the appliance.
Fit the supplied white spacers (Fig. 8) to these
plates, as per Fig. 9.
Ensure that the lips of the spacers are level with the lip of the cabinet
base.
Fridge/freezer base
Cabinet base
Floor
Fig. 9
x2
Fig. 8
With the base of the appliance aligned correctly with the edge of the
cabinet base, the metal trim at the top of the appliance should sit flush
against the cabinet edge (if it does not, ensure the base is aligned as per
Fig. 9 and that the metal trim in Fig. 10 is not damaged).
Secure the top of the appliance to the top of the cabinet through the
metal trim screw holes marked ‘T’ in
Fig.
10.
Fig. 10
T
T
Trim
Installation into the cabinet
20
