background image

4

This appliance has been manufactured to the strictest standards and 
complies with all applicable legislation, including Electrical safety 
(LVD) and Electromagnetic interference compatibility (EMC). Parts 
intended to come into contact with food conform to 1935/2004/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE 
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU. At 
the end of its working life, the product must not be disposed of as 
urban waste. The refrigeration system contains insulating gases and 
refrigerants, which require specialised waste disposal. The valuable 
materials contained in this appliance can be recycle. It must be taken 
to a special local authority differentiated waste collection centre or 
to a dealer providing this service.

Before disposing of an old appliance, remove the door seals etc. to 
reduce the risk of child entrapment.

Disposing of a household appliance separately avoids possible 
negative consequences for the environment and health deriving 
from inappropriate disposal and enables the constituent materials to 
be recovered to obtain significant savings in energy and resources. 
As a reminder of the need to dispose of household appliances 
separately, the product is marked with a crossed-out wheeled 
dustbin. 

Summary of Contents for MITF210



























Reviews: