background image

6

The freezer may have an odour to it at first use. This will disappear 
as the appliance cools.

Please note:
The appliance will start on temperature setting 3 and work 
continuously until it comes down to the correct temperature.
If the appliance is switched off, you should allow five minutes 
before switching it on again to prevent unnecessary damage to the 
compressor. 
Never store inflammable or explosive items and strong corrosive 
acids or alkalis in the appliance.
This freezer cools your food by making the inside back of the cavity 
cold. It is normal for frost to build up on this surface; it then 
dissipates and drains through a small drain at the bottom, where it 
evaporates harmlessly. The presence of some frosting is not a 
malfunction of the freezer.

Freezer use

The freezer compartments are designed to store only frozen food.

 

Never put hot or warm foods in the freezer, allow them to cool fully

before putting them into the freezer.

 

Follow the instructions on the food packaging for storage of

frozen food.  If no information is provided, foods should not be
stored for more than three months after the purchase date.

 

Store food in small packages (ideally less than 2.5kg).  This

reduces the freezing time and improves the quality of the food
after thawing.

 

Wrap food before putting into the freezer.  To stop the wrapping

sticking together, ensure it is dry.

Summary of Contents for MITF210



























Reviews: