montpellier MITF300, Installation And Operating Instructions Manual

EN - 7

1.2 Installation warnings

Before using your freezer for the first time, 

please pay attention to the following points:

•  The operating voltage for your freezer is 

220-240 V at 50Hz.

•  The plug must be accessible after 

installation.

•  Your freezer may have an odour when 

it is operated for the first time. This is 

normal and the odour will fade when your 

freezer starts to cool. 

•  Before connecting your freezer, ensure 

that the information on the data plate 

(voltage and connected load) matches 

that of the mains electricity supply. If in 

doubt, consult a qualified electrician.

•  Insert the plug into a socket with an 

efficient ground connection. If the socket 

has no ground contact or the plug does 

not match, we recommend you consult a 

qualified electrician for assistance.

•  The appliance must be connected 

with a properly installed fused socket. 

The power supply (AC) and voltage at 

the operating point must match with 

the details on the name plate of the 

appliance (the name plate is located on 

the inside left of the appliance).

•  We do not accept responsibility for any 

damages that occur due to ungrounded 

usage.

•  Place your freezer where it will not be 

exposed to direct sunlight.

•  Your freezer must never be used 

outdoors or exposed to rain.

•  Your appliance must be at least 50 cm 

away from stoves, gas ovens and heater 

cores, and at least 5 cm away from 

electrical ovens.

•  If your freezer is placed next to a deep 

freezer, there must be at least 2 cm 

between them to prevent humidity 

forming on the outer surface.

•  Do not cover the body or top of freezer 

with lace. This will affect the performance 

of your freezer.

•  Clearance of at least 150 mm is required 

at the top of your appliance. Do not place 

anything on top of your appliance.

•  Do not place heavy items on the 

appliance.

•  Clean the appliance thoroughly before 

use (see Cleaning and Maintenance).

•  Before using your freezer, wipe all parts 

with a solution of warm water and a 

teaspoon of sodium bicarbonate. Then, 

rinse with clean water and dry. Return all 

parts to the freezer after cleaning.

•  The installation procedure into a kitchen 

unit is given in the installation manual. 

This product is intended to be used in 

proper kitchen units only.