background image

Here For You

Her

e F

or Y

ou

After-sales assistance

If you continue to experience problems with your 

Integrated Freezer

, please call the Montpellier customer 

service helpline on: 

01759 487839

Please have all your product details available, including the model number, serial number, date of purchase,  

and your retailer’s details before registering a fault.

The service call cannot progress without this information.

Your 5 year Manufacturer’s guarantee

THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during 
the 

first 60 months from date of purchase provided that:

Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, 

such 

as a Sales Receipt, showing that the appliance was purchased within the 60 months prior to the date 

of claim.

What is not covered under the Guarantee

Any appliance not correctly installed and operated in accordance with the manufacturer’s instructions.

Any appliance that is used for anything other than domestic purposes.

Any defect caused by accident, misuse, unauthorised modification or inexpert repair.

C ost of Call-out where a fault cannot be found with the appliance.

C ost of Call-out for work covering routine maintenance, such as, but not exclusively, cleaning of filters or 

defrosting.

C ost of Call-out for work required to correct the alignment of doors following door reversal procedures 

carried out by you.

Use of the appliance by anyone other than the Householder.

Use in any commercial environment.

C onsumable items, such as, but not exclusively, fuses in plugs, bulbs and breakable items which require 

routine replacement.

R epair costs incurred that have not been authorised by 

Montpellier

 and/or carried out by a non-approved 

Montpellier

 engineer.

Montpellier Appliances do not accept claims for consequential loss, rusting, corroding, delivery damage 

or scratches. 

YOUR GUARANTEE IS VALID ONLY IN THE UK.

To register your appliance simply complete the card in your appliance pack and return it with a stamp affixed or 

alternatively you can register online at 

www.montpellier-appliances.com/support

SERVICE HELP-LINE

Should your appliance develop a fault, please call the Montpellier customer service helpline on: 

01759 487839

Please remember to have all your product details available, including the model number, serial number, date of 

purchase and your retailer’s details before registering a fault.

Here For You

Her

e F

or Y

ou

After-sales assistance

If you continue to experience problems with your 

Integrated Freezer

, please call the Montpellier customer 

service helpline on: 

01759 487839

Please have all your product details available, including the model number, serial number, date of purchase,  

and your retailer’s details before registering a fault.

The service call cannot progress without this information.

Your 

5

 year Manufacturer’s guarantee

THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during 
the 

first 60 months from date of purchase provided that:

Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, 

such 

as a Sales Receipt, showing that the appliance was purchased within the 60 months prior to the date 

 

of claim.

What is not covered under the Guarantee

Any appliance not correctly installed and operated in accordance with the manufacturer’s instructions.

Any appliance that is used for anything other than domestic purposes.

 Any defect caused by accident, misuse, unauthorised modification or inexpert repair.

C ost of Call-out where a fault cannot be found with the appliance.

C ost of Call-out for work covering routine maintenance, such as, but not exclusively, cleaning of filters or 

defrosting.

C ost of Call-out for work required to correct the alignment of doors following door reversal procedures 

carried out by you.

Use of the appliance by anyone other than the Householder.

Use in any commercial environment.

C onsumable items, such as, but not exclusively, fuses in plugs, bulbs and breakable items which require 

routine replacement.

R epair

 

costs incurred that have not been authorised by 

Montpellier

 and/or carried out by a non-approved 

Montpellier

 engineer.

 Montpellier Appliances do not accept claims for consequential loss, rusting, corroding, delivery damage 

or scratches. 

YOUR GUARANTEE IS VALID ONLY IN THE UK.

To register your appliance simply complete the card in your appliance pack and return it with a stamp affixed or 

alternatively you can register online at 

www.montpellier-appliances.com/support

SERVICE HELP-LINE

Should your appliance develop a fault, please call the Montpellier customer service helpline on: 

01759 487839

Please remember to have all your product details available, including the model number, serial number, date of 

purchase and your retailer’s details before registering a fault.

2

7

Summary of Contents for MITF88






























Reviews: