Transportation and Handling
For safe lifting, tilt the appliance backwards by no more than 45 degrees, hold the
base and rear corners of cabinet. Lift the refrigerator carefully. Never use the door
handles for lifting. To move the refrigerator on a flat level surface, tilt it slightly
backwards and push backwards.
This unit is heavy and could cause injury
–
ensure there are adequate people
present to move the appliance.
Installing and Switching on Your Appliance
•
Operating voltage for your appliance is 220-240V at 50Hz.
•
Before plugging in the power supply, ensure that the voltage on the rating label
corresponds to the working voltage of your electrical system in your home.
•
Insert the plug into an efficient Ground (Earth) connection. If the socket has no
Ground (Earth) contact or the plug does not match, we suggest you call an authorised
electrician for assistance.
•
Place your appliance in an area that is not exposed to direct sunlight.
•
Your appliance should be placed at least 10cm away from stoves, ovens and other
heating cores.
•
This appliance should never be used outdoors or left in the rain.
•
When your appliance is placed next to a chest freezer or freezer, there should be at
least 10cms between them to prevent humidity on the outer surface.
•
The appliance must be used in the vertical position and on a flat surface.
•
To level the appliance, use the adjustable feet at the front of the appliance.
•
Do not place your appliance on a carpeted surface as this will prevent adequate
ventilation.
•
Keep ventilation openings in the appliance enclosure or in the built in structure clear of
obstruction
•
This appliance should only be placed on a flat, firm surface.
•
It is recommended the appliance is installed by a qualified kitchen fitter or joiner.
5
