14
Installation preparation
This appliance must never be installed
close to heat sources, e.g. heating
elements or cookers, nor in damp
places.
Seek the help of another individual, or
two, when installing this appliance. This
appliance may have sharp edges. Wear
adequate PPE for the task and
environment.
Ventilation
The main consideration when installing any refrigeration unit into
a fitted kitchen is ventilation. The heat removed from the cooling
compartment needs to be dissipated into the atmosphere. Incorrect
ventilation can lead to premature compressor failure, excessive
power
1776
45
57
540
540
1785-
1788
min. 30
560-570
550 min.
=
airflow
(Fridge dimensions are approximate)
Fig. 5
•
To ensure the appliance is level, you
should use the height adjustable feet
at the front of the appliance.
•
The cooling system at the rear of the
appliance must not touch the rear wall.
The greater the gap, the better.
•
The appliance must be installed with
adequate ventilation. Ensure that there
Fig. 6
is clearance above the appliance to allow air to escape and
that there is space between the rear of the appliance and the
wall.
DO NOT TILT BEYOND 40°
Summary of Contents for MITL320
Page 23: ...22 NOTES...
