Section 2. Safety Advice
THIS APPLIANCE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN!
It is important that you use only ‘oven proof’ pans and
dishes when using the appliance for cooking or grilling. Never
allow cookware and/or utensils to come into contact with the
top heating element/grill.
Do not use melamine or plastic containers when cooking or
grilling.
Always take care when removing ovenware from the oven
and in particular avoid touching the Grill Element.
It is important that you use only metal pans specifically
designed and/or approved for use on Ceramic Hobs. Never
allow melamine or plastic containers to come in contact with
the heat zones.
-
Please read this booklet thoroughly before installing and
switching on the appliance. The manufacturer accepts no
responsibility for incorrect installation and usage.
-
This appliance is guaranteed for Domestic Use Only.
-
This appliance shall not be used by children aged from 8 years
and above and persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction on how to use the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
-
This appliance must only be used for cooking/heating food
items. Do not use it for any other purpose.
-
Do not twist or bend the connection/power cable, and keep it
away from hot surfaces.
-
Following installation make sure that the power cable is not
trapped underneath the appliance.
-
Keep the appliance surfaces clean. Failure to do this could lead
to the appliance malfunctioning.
-
The surface of this appliance will get extremely hot during use.
Take care when using the appliance and keep children well away.
-
The interior and surface of this appliance will remain hot after it
has been turned off. Do not touch or clean the appliance until it
has completely cooled down.
-
Never lift this appliance using the door handle or ‘open’ door.
-
If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
7
Summary of Contents for MTC60FS
Page 11: ...Gas Mark to F C Temperature Conversion 11 ...
Page 15: ...15 ...