27
8. AUTOMATIC
WASHING/DRYING
CYCLE
- Washing
Open the drawer and put in the correct
amount of detergent.
Refer to the list of washing programmes
for the fabrics to be washed (e.g. very dirty
cotton) and turn the selector knob to the
required programme.
Adjust
the
wash
temperature
if
necessary.
Press the option buttons (if required).
Check that the tap is turned on and that
the discharge hose is positioned correctly.
- Drying
Select the degree of dryness that you
require:
EXTRA DRY
(suitable for towels, bathrobes and
bulky loads).
IRON DRY
(that leaves the laundry ready for
ironing).
CUPBOARD DRY
(for items that will be put away
without ironing).
Press the
START/PAUSE
button.
At the end of the wash phase the display
will show the drying time remaining.
When the programme is finished the word
"End"
will appear on the display. After
5
minutes
the appliance will go into standby
mode (on certain models, the display will
show two lines).
Switch off the machine by turning the
programme selector to the
OFF
position.
Open the door and remove the laundry.
Turn off the tap.
CANCELLING THE DRYING PROGRAMME
To cancel the drying programme, press
and hold the
DRYING SELECTION
button
for about
3 seconds
.
In order to ensure the correct operation of
the appliance, it is advisable not to
interrupt the drying phase unless it is
absolutely necessary.
After cancelling the drying programme,
the cool down phase will begin and you
must wait for about 10/20 minutes before
opening the door.
