Monument 1043J Instructions Download

Page: 1 / 3

HYDRAULIC MANHOLE

COVER LIFTER

INSTRUCTIONS

1. Assemble Manhole Cover Lifter.

2. Clean out the keyholes of the manhole cover.

3. Fix keys into position and wheel lifter into place.

4. Pump cylinder to raise manhole cover.

5. Once cover is clear of the ground pull the lifter to move the cover.

6. To lower the cover release the cylinder valve.

ALWAYS WEAR PROTECTIVE FOOTWARE

THIS TOOL HAS A SAFE WORKING LOAD OF 1.5 TONS

Summary of Contents for 1043J

Page 1: ...he manhole cover 3 Fix keys into position and wheel lifter into place 4 Pump cylinder to raise manhole cover 5 Once cover is clear of the ground pull the lifter to move the cover 6 To lower the cover...

Page 2: ...beam through the body Slide lifting hooks on either side Ensure hooks face towards the back wheel Attach wheels and handle Fit keys into cover and move lifter into position Pump jack handle to lift co...

Page 3: ...IVE FOOTWARE 2 ENSURE HOOKS ARE ATTACHED FACING THE CORRECT DIRECTION 3 IF COVER IS STUCK HIT ARROUND ITS EDGE TO BREAK THE SEAL IF THIS DOES NOT WORK USE A SEAL BREAKER DO NOT CONTINUE TO PUMP CYLIND...

Brands by name