PRODUCT INSTRUCTIONS
Product Code :
PPC110
Product Description :
110mm Plastic Pipe Cutter / Beveller
ASSEMBLY
Fit the crossbar to the leg using the two bolts and locknuts. The other
leg can be screwed or bolted to a suitable board for added stability.
SET THE PIPE
With the toggle clamp set to an open position, and the cutting blade
retracted, Slide the pipe into position so that the required length is
positioned in line with the cutting blade
ADJUST THE CLAMP
If necessary adjust the clamp to suit particular sizes of the pipe. Turn
the catch anti clockwise to reduce clamping force, turn the catch
clockwise to increase clamping force.
Do not over-tighten the toggle
clamp
CLAMP THE PIPE
Secure the pipe by closing the toggle clamp.
