6
REMOTE CONTROL
the air conditioner.
timer press this button to set timer.
swing press this button, and the hori-
zontal guide vane rotates automati-
cally.
temperature conversion button
temperature is converted from
o
C to
o
F.
cool press this button to select cool mode.
dehumidify press this button to select
dehumidify mode.
fan press this button to select fan mode.
up press up to set temperature or
adjust timer.
down press down to set temperature
or adjust timer.
high press this button to select high speed.
mid press this button to select mid speed.
low press this button to select low speed.
sleep press this button to set sleep
mode. at the moment the speed of
speed, in sleep mode temperature and
speed cannot be changed. press this
button again to cancel.
INSTALLATION
-
tioner to enable smooth circulation of air. (Figure 1.)
Assembly method of exhaust pipe
•
Connect exhaust pipe assembly with round joint. (Figure 2.)
•
Fix the round end of the connected exhaust pipe assembly at air outlet
of the air conditioner. (Figure 3.)
•
Connect the oblate joint of the connected exhaust pipe assembly with
seal plate of window. Install the seal plate on the nearest window. Make
sure there are no obstacles at a distance of 50cm around the window
to guarantee unimpeded air exhaust.
•
The exhaust pipe is 60cm~170cm long (including adapter). We
recommend using the minimum length so as to save energy for you.
•
The length of exhaust pipe is especially designed in accordance with the
Installation of window seal plate (Figure 4.)
Design of window sealplate complies with most standard horizontal or
vertical windows.
•
Wall mounted (Figure 5.)
•
Bow alignment (Figure 6.)
•
Incorrect bending (Figure 7.)
Instruction manual
